Photo, Crazymanmike?
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| making portable downdraft table http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3569 |
Page 1 of 1 |
| Author: | Terry Stowell [ Wed Oct 19, 2005 11:10 pm ] |
| Post subject: | |
OK. I got some 2' X 4' pegboard, plywood, and more time than money. (else I would've bought Delta's nifty one, but a little pricey) Box construction is straightforward. Anyone got any ideas to soften the top? (router pad?) How bout baffling? TIA |
|
| Author: | Don Williams [ Thu Oct 20, 2005 12:31 am ] |
| Post subject: | |
Rockler has this great anti-slip coating product made for just this application. |
|
| Author: | crazymanmichael [ Thu Oct 20, 2005 12:56 am ] |
| Post subject: | |
i just use the rubber knobby drawer liners, which also work well as router pads and are much cheaper, on mine. as to baffling, mine has none though i have given consideration to it. since it works quite well without it though i have never felt it worthwhile to expend the time not materials to put baffles in. |
|
| Author: | L. Presnall [ Thu Oct 20, 2005 1:01 am ] |
| Post subject: | |
Photo, Crazymanmike?
|
|
| Author: | Paul Schulte [ Thu Oct 20, 2005 2:02 am ] |
| Post subject: | |
Hey CrazyMan, I do the exact same thing. Works great. |
|
| Author: | crazymanmichael [ Thu Oct 20, 2005 4:56 am ] |
| Post subject: | |
sorry larry, i haven't the technology. but just imagine a rectangular box, mine is about 26" x 24" x 6" , with a pegboard top suitably supported internally, and with a 4" dust port at one end. certainly not high tech. i also have a handle on it just to make pulling it out from under a bench easier. the rubber drawer liners came from home depot as i recall, but are available at walmart etc. also. |
|
| Author: | L. Presnall [ Thu Oct 20, 2005 9:04 am ] |
| Post subject: | |
OK CMM, I can do that...of course the picture in my mind is in black and white...I suppose the actual table will be in color?!!! 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|